Abrinia, Karen
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2022, Pages 1749-1757]
Afshin, Mehdi
Development of the Virtual Crack Closure Technique using Layer Wise theory for Delamination Propagation of a Composite Beam in Mode I [Volume 8, Issue 1, 2021, Pages 1443-1452]
Aghdami Sani, Mohammad Reza
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2022, Pages 1642-1632]
Ahmadi, Hamed
Investigation on the Energy Absorption of Elastomeric Auxetic Structures in Quasi-static and Impact Loading [Volume 8, Issue 1, 2021, Pages 1431-1442]
Akbari Baghal, Amir ebrahim
Corrigendum to :
The paper published in: Vol.7, No.4, Winter 1399, Pages: 1255-1262
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy Fiber and Polymer Concrete [Volume 8, Issue 1, 2021, Pages 1473-1474]
Akbari Dastgerdi, Ali
Energy absorption of polyester/kenaf fiber/carbon black hybrid composites affected by fibers aspect ratio [Volume 8, Issue 4, 2022, Pages 1861-1871]
Alitavoli, Majid
Numerical investigation of the material gradient using different stiffness functions by consideration of the graded stiffness of the dragonfly wing membrane [Volume 8, Issue 1, 2021, Pages 1307-1316]
Alizadeh, Ali
The role of mechanical alloying time on the thermal and mechanical behavior of Al/Ni reactive composites [Volume 8, Issue 4, 2022, Pages 1817-1825]
Allaee, Mohammad Hossein
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2022, Pages 1699-1687]
Aminnejhad, Babak
Extraction of Mechanical Properties of Carbon Nanotubes in water Based Polymer latex for Application in Petroleum Well Cementing [Volume 8, Issue 4, 2022, Pages 1758-1766]
Amirashjaee, Kian
Numerical and experimental study of carbon / epoxy composite laminate response to low velocity impact [Volume 8, Issue 1, 2021, Pages 1461-1472]
Anbarzadeh, Ehsan
Experimental study of bond strength between core and composite layers under tensile and shear loads in different methods of fabricating nucleate composite structures [Volume 8, Issue 3, 2022, Pages 1667-1659]
Ansari, Reza
Comparison of moisture aging effect on flexural and buckling behavior of two types of balsa core sandwich structures [Volume 8, Issue 4, 2022, Pages 1767-1779]
Araghchi, Masoud
The effect of Inconel 625 value on mechanical and tribological properties of PTFE-based composites: Experimental and molecular dynamics simulation studies [Volume 8, Issue 4, 2022, Pages 1797-1805]
Arefi Osgouei, Ali
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2022, Pages 1699-1687]
Ashrafi, Mohammad Javad
A numerical study on crack closure using a combination of self-healing microcapsules and shape memory alloy wires [Volume 8, Issue 4, 2022, Pages 1806-1816]
Avand, Raziye
Feasibility of Production of an iron-base Metal Matrix Composite by Infiltration of molten Gray Cast Iron into a 304 Stainless Steel Porous Skeleton [Volume 8, Issue 3, 2022, Pages 1658-1653]
Azadi, Mohammad
Study of cyclic behavior, displacement-controlled low-cycle fatigue lifetime and failure in open-hole polymer-matrix composite reinforced by carbon fibers under various loading rates and amplitudes [Volume 8, Issue 1, 2021, Pages 1373-1386]
Azarafza, Reza
Experimental study and optimization of effective drilling parameters
on fibers glass–epoxy composite [Volume 8, Issue 1, 2021, Pages 1411-1420]
Azizi, Zahra
Study of microstructure and investigation of mechanical properties of pure aluminum-graphene nanocomposite using ball mill method in casting process with mechanical and electromagnetic stirring [Volume 8, Issue 2, 2021, Pages 1532-1542]
B
Bastam, Kaveh
Tensile properties of flexible latex-based composites reinforced by cotton fibers in the presence of shape memory alloys [Volume 8, Issue 4, 2022, Pages 1780-1788]
Bazrkar, Hamid
Extraction of Mechanical Properties of Carbon Nanotubes in water Based Polymer latex for Application in Petroleum Well Cementing [Volume 8, Issue 4, 2022, Pages 1758-1766]
D
Dabiryan, Hadi
Experimental study of the impact properties of foam based composites reinforced with warp-knitted spacer fabric [Volume 8, Issue 1, 2021, Pages 1353-1362]
Daneshjoo, Zahra
A novel approximate method for determining mixed mode I/II bridging law of laminated composites [Volume 8, Issue 4, 2022, Pages 1836-1848]
Daneshmand, Hamid
The effect of Inconel 625 value on mechanical and tribological properties of PTFE-based composites: Experimental and molecular dynamics simulation studies [Volume 8, Issue 4, 2022, Pages 1797-1805]
Darvizeh, Abolfazl
Numerical investigation of the material gradient using different stiffness functions by consideration of the graded stiffness of the dragonfly wing membrane [Volume 8, Issue 1, 2021, Pages 1307-1316]
Davar, Ali
Numerical and Experimental Buckling Strength Analysis of Composite Grid Stiffened Cylindrical Shells Before and After Applying Low-Velocity Transverse Impact [Volume 8, Issue 1, 2021, Pages 1363-1372]
Davar, Ali
Statistical-experimental analysis of the effect of fabrication parameters on the strength of composite grid-stiffened cylinders under compressive axial load [Volume 8, Issue 2, 2021, Pages 1543-1555]
Davar, Ali
Experimental and Numerical Study of Residual Strength of Composite Grid Stiffened Cylindrical Shells Under Sequential Compressive Axial Load [Volume 8, Issue 2, 2021, Pages 1503-1513]
Davar, Ali
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2022, Pages 1699-1687]
Delbariani-Nejad, Ali
Reliability analysis of the delamination onset and growth due to the matrix cracking in general composite laminates [Volume 8, Issue 1, 2021, Pages 1397-1410]
Delshad Gholami, Mohammad
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Dodanke, Amir Hossein
Experimental study of the impact properties of foam based composites reinforced with warp-knitted spacer fabric [Volume 8, Issue 1, 2021, Pages 1353-1362]
Dorfaki, Mohammad
Study of cyclic behavior, displacement-controlled low-cycle fatigue lifetime and failure in open-hole polymer-matrix composite reinforced by carbon fibers under various loading rates and amplitudes [Volume 8, Issue 1, 2021, Pages 1373-1386]
E
Emamieh, Hamid Reza
An experimental investigation of impact resistance of sandwich panels reinforced by nano-silica and nano-clay [Volume 8, Issue 2, 2021, Pages 1573-1582]
Emamy, Massoud
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2022, Pages 1749-1757]
Eskandari Jam, Jafar
Numerical and Experimental Buckling Strength Analysis of Composite Grid Stiffened Cylindrical Shells Before and After Applying Low-Velocity Transverse Impact [Volume 8, Issue 1, 2021, Pages 1363-1372]
Eskandari Jam, Jafar
Statistical-experimental analysis of the effect of fabrication parameters on the strength of composite grid-stiffened cylinders under compressive axial load [Volume 8, Issue 2, 2021, Pages 1543-1555]
Eskandari Jam, Jafar
Experimental and Numerical Study of Residual Strength of Composite Grid Stiffened Cylindrical Shells Under Sequential Compressive Axial Load [Volume 8, Issue 2, 2021, Pages 1503-1513]
Eskandari Jam, Jafar
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2022, Pages 1699-1687]
Eskandari Jam, Jafar
Investigation of tensile strength and dielectric constant of GFRP composite [Volume 8, Issue 3, 2022, Pages 1714-1708]
Eslami-Farsani, Reza
Effects of stacking sequence of fibers and thermal environments on the flexural properties of the basalt fibers/thin-ply unidirectional carbon fibers/epoxy hybrid composites [Volume 8, Issue 2, 2021, Pages 1514-1521]
Eslami-Farsani, Reza
The effect of Shape memory wire on the ballistic behavior of smart corrugated core sandwich panels [Volume 8, Issue 2, 2021, Pages 1612-1627]
Estakhri, Mohammad
The role of mechanical alloying time on the thermal and mechanical behavior of Al/Ni reactive composites [Volume 8, Issue 4, 2022, Pages 1817-1825]
Etemadi Haghighi, Shahram
Effect of loading rate on the mechanical behavior of glass fiber and glass
fiber/polymer composites [Volume 8, Issue 1, 2021, Pages 1283-1306]
Etemadi Haghighi, Shahram
The effect of fluid column pressure on the natural frequencies of an annular sector plate made of functionally graded material [Volume 8, Issue 2, 2021, Pages 1522-1531]
Ezatpour, Hamidreza
Effect of carbonaceous hybrid reinforcement and extrusion temperature on the microstructure and mechanical properties of AA7075 matrix hybrid composite prepared by semi-solid casting [Volume 8, Issue 1, 2021, Pages 1339-1352]
F
Fadavian, Ahmad
Statistical-experimental analysis of the effect of fabrication parameters on the strength of composite grid-stiffened cylinders under compressive axial load [Volume 8, Issue 2, 2021, Pages 1543-1555]
Fakhreddini-Najafabadi, Sajjad
Numerical and experimental study of carbon / epoxy composite laminate response to low velocity impact [Volume 8, Issue 1, 2021, Pages 1461-1472]
Farrokhabadi, Amin
Reliability analysis of the delamination onset and growth due to the matrix cracking in general composite laminates [Volume 8, Issue 1, 2021, Pages 1397-1410]
Ferdousi, Adel
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2022, Pages 1642-1632]
Fotouhi, Mohammad
Reliability analysis of the delamination onset and growth due to the matrix cracking in general composite laminates [Volume 8, Issue 1, 2021, Pages 1397-1410]
G
Gerami, Ahmad
Numerical and Experimental Buckling Strength Analysis of Composite Grid Stiffened Cylindrical Shells Before and After Applying Low-Velocity Transverse Impact [Volume 8, Issue 1, 2021, Pages 1363-1372]
Gerami, Ahmad
Experimental and Numerical Study of Residual Strength of Composite Grid Stiffened Cylindrical Shells Under Sequential Compressive Axial Load [Volume 8, Issue 2, 2021, Pages 1503-1513]
Geranmayeh, Abdolreza
Effects of stacking sequence of fibers and thermal environments on the flexural properties of the basalt fibers/thin-ply unidirectional carbon fibers/epoxy hybrid composites [Volume 8, Issue 2, 2021, Pages 1514-1521]
Ghaedri Hamidi, Ahmad
Feasibility of Production of an iron-base Metal Matrix Composite by Infiltration of molten Gray Cast Iron into a 304 Stainless Steel Porous Skeleton [Volume 8, Issue 3, 2022, Pages 1658-1653]
Ghanbarzadeh, Afshin
Inspection of Multilayer Pipes Using Torsional Guided Waves [Volume 8, Issue 2, 2021, Pages 1603-1611]
Ghasemi, Ahmad Reza
Investigation of thermal fatigue effects on crack propagation and mode I delamination of multilayer laminated composites using digital image correlation [Volume 8, Issue 3, 2022, Pages 1652-1643]
Ghorbankhan, Ali
Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle [Volume 8, Issue 1, 2021, Pages 1421-1430]
H
Hamidi, Ehsan
Experimental Analysis of Mechanical Properties of Nanocomposites Based on Poly amide 6/ EPDM /Carbon Nanotubes [Volume 8, Issue 1, 2021, Pages 1453-1460]
Hamze, Saeid
Experimental study of the impact properties of foam based composites reinforced with warp-knitted spacer fabric [Volume 8, Issue 1, 2021, Pages 1353-1362]
Hasan Zadeh, Mehdi
Self-cleaning properties and free surface energy of ethylene vinyl acetate (EVA) nanocomposite coatings reinforced with silica nanoparticles [Volume 8, Issue 3, 2022, Pages 1736-1726]
Hashemi, Ramin
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Heydari Beni, Mohsen
Numerical and Experimental Buckling Strength Analysis of Composite Grid Stiffened Cylindrical Shells Before and After Applying Low-Velocity Transverse Impact [Volume 8, Issue 1, 2021, Pages 1363-1372]
Heydari Beni, Mohsen
Statistical-experimental analysis of the effect of fabrication parameters on the strength of composite grid-stiffened cylinders under compressive axial load [Volume 8, Issue 2, 2021, Pages 1543-1555]
Heydari Beni, Mohsen
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2022, Pages 1699-1687]
Hosseini, Shahram
Nonlinear bending analysis of multi-layer hyperelastic silicon-rubber plates using meshless based on radial basis functions [Volume 8, Issue 1, 2021, Pages 1387-1396]
J
Jafari, Ali Asghar
The effect of fluid column pressure on the natural frequencies of an annular sector plate made of functionally graded material [Volume 8, Issue 2, 2021, Pages 1522-1531]
Jafari Vardanjani, Mehdi
Design and Characterization of Thermal and Optical Properties of Nano-Composite Self-Cleaning Refractive Transparent-Opaque Smart Window [Volume 8, Issue 2, 2021, Pages 1479-1493]
Jjabbari, Mohsen
An experimental investigation of impact resistance of sandwich panels reinforced by nano-silica and nano-clay [Volume 8, Issue 2, 2021, Pages 1573-1582]
K
Kahhal, Parviz
A correction factor to improve Poisson’s ratio prediction of 2D auxetic structure using finite element analysis and experiment [Volume 8, Issue 2, 2021, Pages 1556-1562]
Karevan, Mehdi
Design and Characterization of Thermal and Optical Properties of Nano-Composite Self-Cleaning Refractive Transparent-Opaque Smart Window [Volume 8, Issue 2, 2021, Pages 1479-1493]
Karevan, Mehdi
Fire resistance polyurethane/poly Urea micro/Nanocomposite foams reinforced with natural zeolite/Graphite nanoplatelets (GNP) [Volume 8, Issue 3, 2022, Pages 1725-1715]
Karevan, Mehdi
Self-cleaning properties and free surface energy of ethylene vinyl acetate (EVA) nanocomposite coatings reinforced with silica nanoparticles [Volume 8, Issue 3, 2022, Pages 1736-1726]
Karevan, Mehdi
Energy absorption of polyester/kenaf fiber/carbon black hybrid composites affected by fibers aspect ratio [Volume 8, Issue 4, 2022, Pages 1861-1871]
KASHFI, MOHAMMAD
A correction factor to improve Poisson’s ratio prediction of 2D auxetic structure using finite element analysis and experiment [Volume 8, Issue 2, 2021, Pages 1556-1562]
Kazemirad, Siavash
Nondestructive evaluation of bilayer metal-composite structures using finite element simulation of guided Lamb wave propagation [Volume 8, Issue 3, 2022, Pages 1707-1700]
Khademi, Alireza
Effect of loading rate on the mechanical behavior of glass fiber and glass
fiber/polymer composites [Volume 8, Issue 1, 2021, Pages 1283-1306]
Khalili, Seyed Mohammad Reza Khalili
The effect of Shape memory wire on the ballistic behavior of smart corrugated core sandwich panels [Volume 8, Issue 2, 2021, Pages 1612-1627]
Khodaparast, Mohammad Javad
Experimental study and optimization of effective drilling parameters
on fibers glass–epoxy composite [Volume 8, Issue 1, 2021, Pages 1411-1420]
Khorshidi, Korosh
Free vibration analysis of rectangular doubly curved auxetic-core sandwich panels integrated with CNT-reinforced composite layers using Galerkin method [Volume 8, Issue 3, 2022, Pages 1686-1677]
Khorshidi, Korosh
Free vibration analysis of sandwich plates with magnetorheological smart fluid core by Using modified shear deformation theory [Volume 8, Issue 4, 2022, Pages 1826-1835]
Khorshidvand, Ahmad Reza
An experimental investigation of impact resistance of sandwich panels reinforced by nano-silica and nano-clay [Volume 8, Issue 2, 2021, Pages 1573-1582]
Lazar Usefi, Alireza
Experimental study of bond strength between core and composite layers under tensile and shear loads in different methods of fabricating nucleate composite structures [Volume 8, Issue 3, 2022, Pages 1667-1659]
Liaghat, Gholamhossein
Investigation on the Energy Absorption of Elastomeric Auxetic Structures in Quasi-static and Impact Loading [Volume 8, Issue 1, 2021, Pages 1431-1442]
Lork, Alireza
Extraction of Mechanical Properties of Carbon Nanotubes in water Based Polymer latex for Application in Petroleum Well Cementing [Volume 8, Issue 4, 2022, Pages 1758-1766]
M
Maghsoudpour, Adel
The effect of fluid column pressure on the natural frequencies of an annular sector plate made of functionally graded material [Volume 8, Issue 2, 2021, Pages 1522-1531]
Maher, Roham
The effect of Shape memory wire on the ballistic behavior of smart corrugated core sandwich panels [Volume 8, Issue 2, 2021, Pages 1612-1627]
Mahfuozi, Kamran
Experimental study on mechanical and physical properties of biodegradable fiber reinforced composites [Volume 8, Issue 2, 2021, Pages 1563-1572]
Maleki, Ahmad
Corrigendum to :
The paper published in: Vol.7, No.4, Winter 1399, Pages: 1255-1262
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy Fiber and Polymer Concrete [Volume 8, Issue 1, 2021, Pages 1473-1474]
Mehdi Abdollahi Azghan, Mehdi
The role of mechanical alloying time on the thermal and mechanical behavior of Al/Ni reactive composites [Volume 8, Issue 4, 2022, Pages 1817-1825]
Mirrezaei, Seyed Saeed
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2022, Pages 1642-1632]
Mirzaei, Amin
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2022, Pages 1699-1687]
Mirzaei Sichani, Mohammad Sadegh
Energy absorption of polyester/kenaf fiber/carbon black hybrid composites affected by fibers aspect ratio [Volume 8, Issue 4, 2022, Pages 1861-1871]
Mohammad Aliha, Mohammad Reza
Experimental mixed-mode fracture study in the interface of vertebrae bone tissue-hydroxyapatite cement using the bi-material Brazilian disc specimen [Volume 8, Issue 2, 2021, Pages 1583-1589]
Mohammadi, Bijan
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Mohammadi, Bijan
Experimental study of bond strength between core and composite layers under tensile and shear loads in different methods of fabricating nucleate composite structures [Volume 8, Issue 3, 2022, Pages 1667-1659]
Mosalmani, Reza
Inspection of Multilayer Pipes Using Torsional Guided Waves [Volume 8, Issue 2, 2021, Pages 1603-1611]
Moslemi-Abyaneh, Behzad
Investigation of thermal fatigue effects on crack propagation and mode I delamination of multilayer laminated composites using digital image correlation [Volume 8, Issue 3, 2022, Pages 1652-1643]
Mousavi-Bafrouyi, Seyed Mohammad Saleh
Effects of stacking sequence of fibers and thermal environments on the flexural properties of the basalt fibers/thin-ply unidirectional carbon fibers/epoxy hybrid composites [Volume 8, Issue 2, 2021, Pages 1514-1521]
Mousavi Tarsi, Sayed Ali
Development of the Virtual Crack Closure Technique using Layer Wise theory for Delamination Propagation of a Composite Beam in Mode I [Volume 8, Issue 1, 2021, Pages 1443-1452]
Naderi, Ghasem
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Naderi, Ghasem
Experimental and mathematical investigation of mechanical and microstructural properties of PA6/NBR nanocomposite reinforced with Silicon carbide nanoparticles [Volume 8, Issue 4, 2022, Pages 1789-1796]
Najafi, Moslem
Comparison of moisture aging effect on flexural and buckling behavior of two types of balsa core sandwich structures [Volume 8, Issue 4, 2022, Pages 1767-1779]
Nakhaei, Mohammad Reza
Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle [Volume 8, Issue 1, 2021, Pages 1421-1430]
Nakhaei, Mohammad Reza
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Nakhaei, Mohammad Reza
Experimental and mathematical investigation of mechanical and microstructural properties of PA6/NBR nanocomposite reinforced with Silicon carbide nanoparticles [Volume 8, Issue 4, 2022, Pages 1789-1796]
Nasrollah Barati, Amir Hossein
The effect of fluid column pressure on the natural frequencies of an annular sector plate made of functionally graded material [Volume 8, Issue 2, 2021, Pages 1522-1531]
Neghabi, Mahdi
Investigating effect of Nano-additives orientations on buckling strength of polymeric Nanocomposite plates reinforced by CNT and Nanoclay [Volume 8, Issue 2, 2021, Pages 1590-1602]
Nirumand, Mohamad
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2022, Pages 1749-1757]
Noorian, Mohammad
Uncertainty quantification of natural frequencies of flax/epoxy composite laminates based on a polynomial chaos expansion method [Volume 8, Issue 1, 2021, Pages 1327-1338]
Panahizadeh, valiollah
Experimental Analysis of Mechanical Properties of Nanocomposites Based on Poly amide 6/ EPDM /Carbon Nanotubes [Volume 8, Issue 1, 2021, Pages 1453-1460]
Parsa, Hossein
Investigation of tensile strength and dielectric constant of GFRP composite [Volume 8, Issue 3, 2022, Pages 1714-1708]
Parvaresh, Majid
Investigation on the Energy Absorption of Elastomeric Auxetic Structures in Quasi-static and Impact Loading [Volume 8, Issue 1, 2021, Pages 1431-1442]
Parvari, Yousef
Nondestructive evaluation of bilayer metal-composite structures using finite element simulation of guided Lamb wave propagation [Volume 8, Issue 3, 2022, Pages 1707-1700]
Payravi, Sohrab
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Pishevar, Ahmad Reza
Self-cleaning properties and free surface energy of ethylene vinyl acetate (EVA) nanocomposite coatings reinforced with silica nanoparticles [Volume 8, Issue 3, 2022, Pages 1736-1726]
Pourabdoli, Mahdi
Feasibility of Production of an iron-base Metal Matrix Composite by Infiltration of molten Gray Cast Iron into a 304 Stainless Steel Porous Skeleton [Volume 8, Issue 3, 2022, Pages 1658-1653]
Pourbaba, Masoud
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2022, Pages 1642-1632]
Pourmansouri, Mohammad
Inspection of Multilayer Pipes Using Torsional Guided Waves [Volume 8, Issue 2, 2021, Pages 1603-1611]
Pourrabia, Payam
A correction factor to improve Poisson’s ratio prediction of 2D auxetic structure using finite element analysis and experiment [Volume 8, Issue 2, 2021, Pages 1556-1562]
R
Rahimi, Gholamhossein
Nonlinear bending analysis of multi-layer hyperelastic silicon-rubber plates using meshless based on radial basis functions [Volume 8, Issue 1, 2021, Pages 1387-1396]
Rahmani, Khosrow
Study of microstructure and investigation of mechanical properties of pure aluminum-graphene nanocomposite using ball mill method in casting process with mechanical and electromagnetic stirring [Volume 8, Issue 2, 2021, Pages 1532-1542]
Rahmatabadi, Davood
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Rajabi, Hamed
Numerical investigation of the material gradient using different stiffness functions by consideration of the graded stiffness of the dragonfly wing membrane [Volume 8, Issue 1, 2021, Pages 1307-1316]
Ramezani, Hasan
Nondestructive evaluation of bilayer metal-composite structures using finite element simulation of guided Lamb wave propagation [Volume 8, Issue 3, 2022, Pages 1707-1700]
Ravandi, Mohammad
Uncertainty quantification of natural frequencies of flax/epoxy composite laminates based on a polynomial chaos expansion method [Volume 8, Issue 1, 2021, Pages 1327-1338]
S
Safarabadi, Majid
Investigating effect of Nano-additives orientations on buckling strength of polymeric Nanocomposite plates reinforced by CNT and Nanoclay [Volume 8, Issue 2, 2021, Pages 1590-1602]
Safarpour, Pedram
Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle [Volume 8, Issue 1, 2021, Pages 1421-1430]
Safarpour, Pedram
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Safavi, Mohsen
Design and Characterization of Thermal and Optical Properties of Nano-Composite Self-Cleaning Refractive Transparent-Opaque Smart Window [Volume 8, Issue 2, 2021, Pages 1479-1493]
Shabani, Yasin
Free vibration analysis of rectangular doubly curved auxetic-core sandwich panels integrated with CNT-reinforced composite layers using Galerkin method [Volume 8, Issue 3, 2022, Pages 1686-1677]
Shabani, Yasin
Free vibration analysis of sandwich plates with magnetorheological smart fluid core by Using modified shear deformation theory [Volume 8, Issue 4, 2022, Pages 1826-1835]
Shojaee, Taghi
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Shokrieh, Mahmood M.
Effect of loading rate on the mechanical behavior of glass fiber and glass
fiber/polymer composites [Volume 8, Issue 1, 2021, Pages 1283-1306]
T
Taheri-Behrooz, Fathollah
Numerical and experimental study of carbon / epoxy composite laminate response to low velocity impact [Volume 8, Issue 1, 2021, Pages 1461-1472]
Taheri-Behrooz, Fathollah
Study of microstructure and investigation of mechanical properties of pure aluminum-graphene nanocomposite using ball mill method in casting process with mechanical and electromagnetic stirring [Volume 8, Issue 2, 2021, Pages 1532-1542]
Taheri Boroujeni, Mohsen
A numerical study on crack closure using a combination of self-healing microcapsules and shape memory alloy wires [Volume 8, Issue 4, 2022, Pages 1806-1816]
Tahvili, Arash
Experimental study on mechanical and physical properties of biodegradable fiber reinforced composites [Volume 8, Issue 2, 2021, Pages 1563-1572]
Talei-Fard, Ehsan
Investigation of tensile strength and dielectric constant of GFRP composite [Volume 8, Issue 3, 2022, Pages 1714-1708]
Talezadehlari, Ali
Using a Multi Domain Generalized Differential Quadrature Method to Study the Effect of Crack on the Vibrational Behavior of Composite Cylindrical Shell [Volume 8, Issue 4, 2022, Pages 1749-1760]
Torabi Parizi, Marziyeh
Effect of carbonaceous hybrid reinforcement and extrusion temperature on the microstructure and mechanical properties of AA7075 matrix hybrid composite prepared by semi-solid casting [Volume 8, Issue 1, 2021, Pages 1339-1352]
V
Vafaeesefat, Abas
Experimental study and optimization of effective drilling parameters
on fibers glass–epoxy composite [Volume 8, Issue 1, 2021, Pages 1411-1420]
Vafaeipour Sorkhabi, Ramin
Corrigendum to :
The paper published in: Vol.7, No.4, Winter 1399, Pages: 1255-1262
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy Fiber and Polymer Concrete [Volume 8, Issue 1, 2021, Pages 1473-1474]
Vahdani, Afsaneh
Numerical investigation of the material gradient using different stiffness functions by consideration of the graded stiffness of the dragonfly wing membrane [Volume 8, Issue 1, 2021, Pages 1307-1316]
Vahidshad, Yaser
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2022, Pages 1749-1757]
Y
Yaghootian, Amin
Inspection of Multilayer Pipes Using Torsional Guided Waves [Volume 8, Issue 2, 2021, Pages 1603-1611]
Yarmohammad Tooski, Mehdi
An experimental investigation of impact resistance of sandwich panels reinforced by nano-silica and nano-clay [Volume 8, Issue 2, 2021, Pages 1573-1582]
Z
Zadshakoyan, Mohammad
Fabrication of Carbon Nanotubes-Based Efficient Electromagnetic Waves Shields Nanocomposites Using Electro-Mechanically Dispersion Technique [Volume 8, Issue 3, 2022, Pages 1744-1737]
Zahmatkesh, Mohammadreza
The role of mechanical alloying time on the thermal and mechanical behavior of Al/Ni reactive composites [Volume 8, Issue 4, 2022, Pages 1817-1825]
Zandi, Yousef
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2022, Pages 1642-1632]
Zeinedini, Afshin
Tensile properties of flexible latex-based composites reinforced by cotton fibers in the presence of shape memory alloys [Volume 8, Issue 4, 2022, Pages 1780-1788]